IP54 IP65 VSD motor frequency inverter pump AC drive water proof
VFD
When you need simplicity and intelligence in one self-contained
solution, The SD600 covers a wide range of options. Ideal for
variable and constant torque applications from pumps and fans to
conveyors and mixers as well as many other variable and constant
torque applications. Enjoy plug and play convenience right from the
start. No customizing or special product engineering required.
Excellent unique ventilation design with powerful big fans.
Specification:
Single phase, 220V, 0.4kw to 2.2kw. Three phase, 220V, 0.75kw to
75kw
Three phase, 380V/660V/1140V, 0.75 to 630kw.
Hardware enhanced features.
1 . Ti ‘s 32 bit DSP ( 28034/35), Germany Infineon intelligent
modules;
2 . Sealed cabinet, conformal coating on PCB;
3 . Adopt using aviation plugs that have good quality water proof,
gas and oil proof. (options)
4 . Imported high-speed ventilation fan with 24V DC power supply,
good cooling effect;
5 . Lower failure rate and long service lift
Wiring diagram of SD800. ( the same as AD800 series)
It has 5 digital I/O input, compatible sink and source way. (PNP an
NPN)
2 Analog input, support -10V to 10V, 0-10V, 0/4 to 20mA.
1 Analog output ( 0-10V/0-20mA is selectable)
2 collector output ( FM and CME support the high pulse output).
1 relay output.
Extension PG, I/O card are available.
Built in following functions terminals.
- It has 5 digital I/O input, compatible with sink and source way.
(NPN /PNN)
- 2 Analog input, support -10V to 10V, 0-10V, 0/4 to 20mA.
- 1 Analog output ( 0-10V/0-20mA cab be selected)
- 2 collector output ( FM and CME support the high pulse output).
- 1 relay output. ( if need two relays please built external card)
- Rs485 communication card.( 485+, 485-)
- Extension card is available. ( 4 digital terminals, 24V power
supply, OP ( external power supply terminal,1 analog output , and 1
relay output )
Features of products.
It has V/F, OLV( open loop vector control ), CLV ( close loop
vector control), Compatible with variety of encoder such as
collector, differential / rotary transformer .
1). Wide speed control range
a). Sensorless open loop vector (OLV) control: 0.5 to 400Hz (
1:100/50Hz datum point )
b) . Sensor with PG card: 0.5 to 400Hz ( 1:100/50Hz datum point)
Good current waveform
2). Response speed improving
Adopting high speed 32 bit DSP to get the high speed response of
frequency inverter.
a.) The response 100rad/s, precision ± 0.5% in sensorless open loop
vector control mode.
b. ). The response 250rad/s, precision ± 0.01% in sensor close loop
vector control mode
3). High torque output under low speed to meet some big inertia
load conditions
High torque under low speed achievement.
Adopting advanced current vector control technology and motor
parameters detecting to make high torque under low speed is
available.
4). Torque control in OLV and CLV
5). Powerful PID function
Flexible PID control with sleep mode, configure waking up
frequency, sleep frequency, that is very easy using for water
supply.
Technical specification
| Items | Specification |
| Control mode | Control mode | SVC in open loop | V/F control | Close loop vector control |
| Starting torque | 0.5Hz 180% | 0.5Hz 150% | 0.00Hz 180% |
| Speed adjust range | 1:100 | 1:100 | 1:1000 |
speed stabilizing
precision | | | ±0.02% |
| Torque precision | NO | NO | ±5% |
| Motor type | General induction motor,permanent magnet synchronous motor* |
Functin design | Highest frequency | General vector control :400Hz V/f control:4000Hz |
| frequency resolution | Digital setting: 0.01Hz analog setting: maximum×0.025% |
| carrier frequency | 0.5K～16KHz, the carrier frequency can be adjust by temperature
automatically |
| Frequency reference setting method | Digital of Control panel, analog AI1, AI2, potentiometer of control
panel, UP/DN control, communication, PLC pulse frequency |
| Accel./decel. characteristic | Linear curve and S curve accel. /decel. mode, range of time: 0.0 to
65000S. |
| V/F curve | 3 mode: linear, multiple points, N Power |
| V/F separation | 2 times separation: totally separation, half separation |
| DC braking | DC braking frequency: 0.0 to 300Hz, DC braking current: 0.0% to
100% |
| Braking unit | Built in braking unit up to 15kw, optional is 18.5kw to 75kw,
external built in for above 93kw. |
| Jog function | Job frequency range: 0.0 to 50.0Hz, the accel. and decel. time of
Jog |
| Configuration PID | Easy to perform pressure, flow, temperature close loop control |
| PLC multiple speed | To achieve 16 segment speed running through built in PLC or
terminal control |
| Common Dc bus * | Multiple inverters use one DC bus for energy balance. |
| Auto voltage regulation (AVR) | Enable to keep output voltage constant when grid fluctuation |
| Over load tolerance capability | G type model: 150% rated current for 60s, 180% rated current for
2s,
P type Model: 120% rated current for 60s, 150% rated current for
3s. |
| tall control when over current, over voltage | Carry out limiting automation for running current, voltage to
prevent over current, over voltage frequently |
| Fast current limit function | minimize the IGBT module broken to protect the inverter, maximum
reduce the over current fault. |
| Torque limit and torque control | "Excavator" characteristics , torque limit automatically during
motor running. Torque control is available in close loop vector
control mode. |
| features | friendly interface | Display Hello when power on. |
| Multiple function key JOG button | It can set for Forward Jog, reverse Jog, forward/reverse switch |
| Timing control function | A total running time and total running time calculating |
| 2 group motor parameters | To achieve two motor switching freely, control mode is selectable |
| Motor over heat protection | Accepting motor temperature sensor signal input via AI1 terminals. |
| Multiple kinds encoder * | Compatible collector, difference, and rotary transformer Encoder. |
| Command source | Control panel, control terminals, series communication, switch
freely. |
| Frequency source | Digital setting, analog current/voltage, pulse setting, serial
communication, main and auxiliary combination. |
| Protection function | Short circuit detect after power on, input/output phase missing,
over voltage, over current, under voltage, over heat, over load
protection. |
| Environment | Application site | Indoor, free of exposure to sunlight, no dusty, no corrosive, no
inflammable gas, no oil and water vapor, and water dipping |
| Altitude | Lower 1000m |
| environment temperature | -10℃～+40℃, power derate for 40～50℃, rated current derated 1% for
1℃increasing. |
| humidity | Less than 95%, no water condense. |
| storage | -40～+70℃ |
Application.
AD series high performance inverter better being used in various
application with high accuracy speed control quick torque response
and starting torque.
Textile: P-jump Winders, Extruders, Tufting Machines, spinning machine
Packaging: In-feed / Out-feed, Case Packing, Bottling & Canning, Carton
Manufacturing. Beverage packing
Plastics & Rubber: Extruders, Blow Molding, Thermoforming, Injection Molding.
Pulp & Paper: Paper Machines, Debarkers, Winders, Saw Mills
Converting: Coaters ,Laminators ,Slitters ,
Flying Cutters
Air Handling: Supply and Return Fans ,Cooling Towers ,Spray Booths ,Dryers
Oil & Gas: Top Drives ,Pumpjacks, Down-hole Pumping Centrifuges
Material Handling: Conveyors, Sortation,
Palletizers, Coil Winding
Metals: Stamping / Punch Press, Wind /Unwind, Cut-to-length,cable
drawing.
Wire Draw
Construction Materials: Kilns, Planers, Flying Cutoff, Mixers
Laundry: Dryers, Extractors, Folders, Washers
Food & Beverage: Conveyors, Fillers, Mixers, Centrifuges
Automotive: Stamping, Test Stands, Indexing, Metal Cutting
Construction crane, hoist, lifting,
How do we made it for IP65 water proof?
This SD600 sealed frequency inverter is enhanced version of S100
VFD, built in with IP65 protection grade.
With excellent in anti-dust, water proof, anti-grease and
anti-corrosion properties, this inverter can using in outdoor
without waterproof cabinet.
All PCB parts are seperated are sealed in top side of cover,
independant cool air duct design.
